Průvodce · Produkt

Jak Frigo funguje? Od senzoru k upozornění ve čtyřech krocích.

Autor: Frigo · Aktualizováno: říjen 2026

Frigo monitoruje prostory a zařízení, kde odchylka přijde draho: chladírny, mrazničky, sklady léčiv, serverovny, vitríny. Tento průvodce vysvětluje, jak je systém postaven, co měří, kdo je kdy upozorněn a co záměrně nedělá.

Stručně
  • Nalepovací senzory měří teplotu a vlhkost 24 hodin denně, bez stavebních úprav a bez kabeláže.
  • Když hodnota opustí vaše limity, Frigo upozorní určené osoby v aplikaci a e-mailem, ihned nebo po zvoleném zpoždění.
  • Všechny přenesené naměřené hodnoty a každá odchylka se ukládají s časovým razítkem a jsou k dispozici jako PDF report. Uživatelé nemohou záznamy měnit ani zpětně doplňovat.
  • Frigo pouze monitoruje. Nic nechladí ani neohřívá a nenahrazuje monitorované zařízení ani audit.

The process in four steps

Frigo works as a loop: detect, alert, document, improve. Four things make that happen.

1Establish the connection

Sensors transmit via LoRaWAN, an open radio standard with low power consumption and long range. Frigo connectivity is required for every setup. One unit covers most locations, larger sites may need more. Range depends on the building and its surroundings. The radio link is encrypted with AES-128, and the connectivity unit sends over its own M2M IoT SIM with a private APN, independent of your Wi-Fi and company network.

2Attach the sensor

Sensors are fixed with adhesive, for example in the cold room, in the freezer, in the medicine cabinet or in the display case. No rebuild and no cabling are needed. Installation takes just a few minutes per sensor.

3Set limits and recipients

You set an upper and lower limit per sensor and decide who is notified. That can be the kitchen team, the pharmacist, the facilities technician or you. Notifications arrive by app and email. Per sensor you choose from which level you are alerted, for example only at “critical” or already at “warning”, and optionally a delay of 15 or 30 minutes, so a briefly opened door does not trigger an alert.

4Monitor, document, improve

When a reading outside its limit reaches the platform, the alert goes to the named recipients immediately, or after the delay you chose. The readings are available in the browser and in the iOS and Android apps. Frigo stores all transmitted readings and every deviation with start, end and duration, and produces PDF reports automatically. Frigo AI adds a short plain-language note per sensor every week: what happened, what is drifting, what needs attention.

What Frigo measures

  • Temperature and relative humidity as the standard measurement
  • Door contact and light sensing where useful
  • Measurement happens at the sensor's location, for example the air temperature in the unit, not the core temperature of goods or medicines

Technology and limits, briefly

  • When sensors transmit: at a fixed rhythm as an alive signal with the current value, and immediately when a limit is crossed.
  • Settings: Transmission settings are the same for all sensors and are managed by Frigo. You set limits, recipients, alarm level and delay.
  • No more data? Frigo reports when data from a sensor stops arriving.
  • Power cut: The connectivity unit bridges about four hours on its built-in battery. After that, Frigo reports the interruption. Sensors do not buffer readings, so data for that period is missing.
  • Sensor battery: Each sensor has its own battery. Frigo replaces the sensor before the battery runs out and tells you beforehand.
  • Records: Users cannot alter or back-fill stored readings and logs.
  • Where it fits: fridges, cold rooms and freezers down to −20 °C, server rooms, warehouses and display cases.

We are happy to answer detailed technical questions in person through the contact form.

What Frigo does not do

  • It does not cool or heat. Frigo does not intervene in the monitored equipment, it only reports.
  • It does not replace equipment. A broken fridge stays broken, but Frigo reports it to the named people.
  • It is not a certification. Frigo supports your self-monitoring and documentation and does not replace an audit or an official inspection.

Where Frigo is used

Each use has its own page with examples, questions and process.

UseTypical places
Gastronomy & hospitalityCold rooms, kitchens, bars, buffets, wine cellars
Pharmacy & healthcareMedicine storage, dispensaries, labs
LogisticsWarehouses, loading docks, cold and warm chain, vehicles
IT & facilitiesServer rooms, network closets, technical rooms, archives
Museums & collectionsGalleries, display cases, depots (temperature, humidity, light)
Frigo Hunt (hunters)Game chiller, fridge and freezer
Private useFreezer chests, fridges, wine and food cellars, holiday homes

An overview of all uses is on the industries overview.

Tell us what you want to monitor. We put your setup together.

Get your setup →

What does Frigo cost?

Sensors, software and reports are included in one monthly subscription. There is no hardware purchase, and sensor replacement is included. A sensor costs CHF 10 to 14 a month on a 24-month term, depending on how many you have (CHF 14 to 19 on 12 months), plus connectivity at CHF 10 per unit per month. From 51 sensors, Enterprise terms apply. Private customers can try Frigo for 14 days, with no charge if they cancel. All prices excl. VAT; current prices are on the pricing page.

Who operates Frigo?

Frigo is operated from Switzerland by AMCO Trade & Finance AG. How we process data is set out in our Privacy Policy. You reach us through the contact form.

Frequently asked questions

How long does installation take?

A few minutes per sensor. Sensors are stuck on, with no rebuild and no cabling.

Who receives the alert?

All recipients you named for the sensor. Notifications arrive by app and email, to everyone at once.

Does every briefly opened door trigger an alert?

Not if you don’t want it to. Per sensor you can set a delay of 15 or 30 minutes. If the value is back in range within that time, the brief deviation does not trigger an alert.

Is Frigo real-time?

Frigo is live monitoring with defined parameters. Sensors transmit regularly and immediately when a limit is crossed. The alert then goes out immediately, or after the delay you chose. Frigo does not measure second by second.

Does Frigo cool or control my equipment?

No. Frigo is a monitoring system. It reports, but does not intervene in the monitored equipment.

Does Frigo replace my HACCP concept or an audit?

No. Frigo supports self-monitoring and documentation through measurement, alerts and automatic records. It is not a certification and does not replace an official inspection.

Can I monitor several sites?

Yes. Frigo offers a multi-site workspace with role-based access, in the browser and in the iOS and Android apps.

What does Frigo cost?

A sensor starts at CHF 10 a month on a 24-month term, depending on how many you have, plus connectivity at CHF 10 per unit per month. Current prices are on the pricing page.

Ready for the first sensor?

Tell us what you want to monitor and we put your setup together.

Get your setup → See pricing